• Browse / Home

Fellowes® Desk-Mount Dual Monitor Arm, Supports 24 Pounds, Black

★★★★★ 1Review | Write a Review

SKU: FEL8041701

Your Price: $337.99/EA      

Description

  • Two fully adjustable monitor arms for optimum viewing control.

  • Easy to mount – clamp attaches to desktops 1-3” thick or through grommet holes at least 3 1/4” in diameter.

  • Elevates monitors from 3 1/2” to 16 1/2” above the desk with a reach of 2 1/2”-27”.

  • Tilts up or down +/-37° and freely swings left or right (360° rotation capability).

QTY:

+

-
   
Features two monitor arms that adjust easily in every way. Easy to mount--clamp attaches to desktops 1" to 3" thick or through grommet holes at least 3 1/4” in diameter. Elevates LCD monitors from 3 1/2" to 16 1/2" above the desk with a reach of 2 1/2"-27". Tilts up or down +/- 37 degrees and freely swings left or right (360° rotation capability). Each arm holds an LCD monitor up to 24 lbs. Meets VESA mounting standards.

Warranty: Manufacturer's three-year limited warranty.

Specifications

Global Product Type AV Mounts, Arms and Hardware-Monitor/TV Arms & Accessories
Mounting Clamp/Grommet
Color(s) Black
Depth 38 3/4"
Width 4 3/8"
For Monitors (Size, Weight) Up to 24 lbs. per Arm
Arm Rotation 360°
Platform Height 22"
Platform Extension Size 3 1/2" to 16 1/2"
Tilt (Degrees) 37°
Overall Depth 38 3/4"
Material(s) Iron
Weight 10.1 lbs.
Height 22"
Swivel 360°
Overall Width 4 3/8"
Overall Height 22"
Compliance Standards Meets VESA Mounting Standards.
Pre-Consumer Recycled Content Percent 0%
Post-Consumer Recycled Content Percent 0%
Total Recycled Content Percent 0%

Reviews

Total Customer Reviews1
Overall : ★★★★★ (3.0 / 5)
Narrow reviews by:


Paul1968
Great Product - Poor Clamp
10/04/2018
Rating : ★★★★★ (3 / 5)
Do You Own This Product? No
Do You Recommend This Product? Yes

This is a great product! Except there is an issue with the clamp size. Most desktops in the U.K. are 25mm thick. This product gives you two options to build the clamp. 1A - and 1B (see images) 1A gives you a minimum depth of approx 27mm. If your desk is 25mm thick then even when you wind part D all the way through and use Part C, it only extends to 27mm, which will not tighten around the thickness of the desk. Option 1B However gives you a maximum depth of approx 28mm. Which means you can't use part C (it wont fit between the clamp and the thickness of a standard desk - 25mm)